An elbow is a fitting that is used to change the direction of the flow at an angle. A Stainless Steel Street Elbow is a fitting that has a female fitting on one end that connects to the male fitting that is present on the subsequent pipe fixture it is attached to. These elbows allow for the movement of pressurized fluid due to its corrosion and oxidation resistance properties. The Stainless Street Elbow can be available with angle bends of 45, 90, and 22.5 degrees.
The bends can be customized to suit different applications. An SS Street Elbow can be connected directly to another fitting without requiring a pipe nipple or a short connecting pipe to join them. These elbows are commonly seen in plumbing applications, drainage, sewers, central vacuum systems, etc. The use of these elbows is regulated by different plumbing codes.The Stainless Steel 45 Degree Street Elbow is employed in changing the direction of flow of media by 45 degree turns. The elbows in this configuration have less friction and pressure on the component.
A 90 Degree Stainless Steel Street Elbow helps in the directional change of fluids and gases at 90 degrees. These elbows are well suited for different construction and structural applications. The Stainless Steel Street 90 grade can be manufactured with the best raw materials and latest technology under the guidance of our renowned staff. A Stainless Steel Reducing Street Elbow is designed to connect piping components of different nominal sizes. These elbows help in connecting the flow from big diameters piping fixtures to small sized components.