The C45 steel is a medium carbon grade that is seen in applications in different conditions. A C45 Round Bar is a versatile grade designed in a uniform cross-sectional area. These bars provide stability and strength to different piping fixtures. They are designed with a superior content of carbon, manganese, phosphorous, sulfur, silicon, nickel, and chromium. The content in the C45 Round Bar gives them enhanced corrosion and oxidation resistance properties across stress-induced setups. These bars have a good surface finish and can adapt well to different conditions.
The C45 Steel Round Bar has outstanding mechanical properties. These bars have a minimum tensile strength of 600mpa with a minimum yield strength of 355mpa and can be elongated by 23% in the system. The bars have a hardness of 55 HRC and have an impact energy of 98 J. A C45 Steel Bar can be heat-treated and hardened slowly at 820 to 860 degrees C. These bars can be heated and can be quenched with oil and water. They have a thermal conductivity of 42.7 W/m-K and have a specific heat of 477 J/Kg-K. The versatile C45 Bar has good machinability and can be processed in a hot or cold rolling process.
The C45 Flat Bar is designed in a rectangular cross-section. These bars are very robust and are seen in structural steel applications in ladders and braces. The versatile C45 Square Bar is a 4-sided grade having equal sides. These bars have a square cross-sectional area and have a stiff and rigid design. They are commonly seen in general assembly, repair, and manufacturing units. A C45 Bright Bar is an aesthetically appealing grade that has a superior surface finish. Produced via the cold rolling process, these bars have tight dimensional tolerance and resistance to reducing agents. The C45 Rod is a high-strength grade that acts as a supporting device for different applications. These rods can be produced in different shapes and sizes as per customer requirements.