Hastelloy Forged Fittings

We Are Largest Independent ANSI/ ASME B16.11 Hastelloy Socket weld/ Threaded Fittings manufacturer And supplier In Mumbai, India

Find Hastelloy Threaded Fittings In Custom Sizes Available In Stock, Check 1/2 to 48 Inch Alloy C276 Threaded Elbow Mechanical Properties & Equivalent

Hastelloy is a superalloy grade designed with a superior content of nickel, chromium, and molybdenum embedded in them. Hastelloy Forged Fittings are high-strength components that have excellent corrosion and oxidation resistance properties. These fittings are characterized to change the direction of the flow of media in the piping industry. The Hastelloy Socket weld Fittings are seen in small piping components of high pressures. These fittings are fitted in a recessed socket area and are welded using a single fillet weld. The Hastelloy C276 Socket weld Fittings are designed to operate in temperatures up to 1038 degrees C. These fittings cannot be heat treated but are usually cold worked.

Exporter And manufacturer Of Hastelloy Socket weld Fittings And Alloy C22 Forged Pipe Cap In India, View Dimensions/ Weight Chart/ Pressure Rating/ Chemical Composition With Price List Ex Mumbai

Hastelloy C276 Forged Fittings have a density of 8.89 g/cm3 with a melting point of 1371 degrees C. These fittings showcase a minimum tensile strength of 601.2mpa with a minimum yield strength of 204.8mpa. They have a hardness of 87 Rockwell with an elastic modulus of 205GPa. The UNS N10276 Forged Fittings can be welded following standard welding procedures. These fittings exhibit excellent machinability and have the good forming capability.

The Hastelloy Threaded Fittings don’t require any welding processes. These fittings have threads on their interior, allowing them to join to subsequent components. They are normally seen in low-pressure applications where the stress on the items is low. An Alloy C276 Threaded Elbow is used to change the direction of the flow of gases and fluids in the system. These elbows can connect two piping fixtures of nominal or unequal sizes.

The versatile DIN 2.4819 Forged Elbow can be utilized to change the direction of flow by 45 or 90-degree turns. These elbows can be availed in long or short radius configurations. A Hastelloy C276 Forged Equal Tee is shaped in the form of a T. These tees allow for movement of the flow to be equal across three outlets. Alloy C22 Forged Pipe Cap is used to seal or cutting the flow of media. These caps also help in protecting the piping fixtures during storage and transportation.

ISO Certified And Tested Material Of Hastelloy C276 Forged Fittings and UNS N10276 Elbow/ Equal Tee

Refer manufacturer Specifications Of Hastelloy C276 Socket weld Fittings and DIN 2.4819 Forged Elbow/ Tee Dimension Chart